Phoenix Gold ZLOC2.2 Audio System

The ZLOC2.2 is the essential solution for enhancing your vehicle’s audio system. While many vehicles now come with integrated amplifiers, the original OEM system often falls short of performance. Replacing the entire audio system can be costly and sometimes not feasible.

That’s where our ZLOC converters step in. Not only do they reduce distortion, but they also allow for seamless integration of aftermarket audio components into your OEM system. Gone are the days of being unable to upgrade your head unit – our ZLOC converters cleverly bypass OEM resistance, all while eliminating unwanted system noise.

Upgrade your audio experience today with our advanced OEM integration solution. The ZLOC2.2 has two high-level inputs that take the speaker signal from the OEM head unit or amplifier and convert it to a low-level output. This allows you to add an external amplifier to install an aftermarket subwoofer and add more power or more speakers.

The ZLOC2.2 has a built-in CLIP indicator that flashes when it senses input or output signal distortion. This lets you easily see when the input signal distorts and enables you to adjust the output signal without clipping for a distortion-free signal. Specifications Speaker Input 2CH Outputs 4CH REM In Yes REM Out Yes Load Select 10-Ohm / 60-Ohm / 20K-Ohm Ground Isolation GND/ISO/200-Ohm Gain Yes,X1 Clipping Yes,X1 Center Frequency 20Hz-110Hz Bass Level -9 ~ +9dB Turn On Mode REM/DC/AUDIO Input Mode N/A Remote None Dimensions(LxWxH)mm 130.6x82x24.8mm Chassis Body Aluminum Operating Voltage 8 to 32V Input Sensitivity 0.5 to 32V Operating Voltage 8 to 32V Output Voltage Max.

7.5V @ 14.4V Max 40V as Input Must be 20K-ohm load Signal to Noise >100dB @6.4V output Input Impedance 10-Ohm / 60-Ohm / 20K-Ohm Frequency Response 10-30kHz THD+N <0.01% Output Impedance < 120-ohm Max Current Draw 120 - 150 mA Turn-On Trigger, DC 3 to 7V Gain -28 to 0dB Terminal Gauge Quick Connect /16# AWG