Happymodel Bassline 2S 2inch Micro FPV Toothpick Drone - SPI Flysky

Full Feature List

• X12 5-in-1 AIO flight controller with built-in 2.4G ELRS V2.0 and OPENVTX for ultimate control and performance High-power 400mw VTX for long-range transmission Upgradeable to support ELRS V3.0 firmware Equipped with powerful EX1103 KV11000 motors for high speed and power Features a CaddxFPV Ant FPV camera for stunning aerial footage Compatible with 2S batteries in the range of 350mah/450mah/550mah/650mah (batteries not included) Large battery tray can accommodate batteries up to 17mm wide and 13mm height for extended flight time. Battery for happymodel Bassline 2s toothpick:GNB 450m
• Ah 2S Battery 7.6V 80/160C XT30 Plug
• Specifications:Brand Name: Happymodel
• Item Name: Bassline 2S 2inch Micro FPV toothpick drone
• Wheelbase: 90mm
• Size: 115mm*115mm*40mm
• Analog version Weight: 40gram Analog version option:2.4G ELRS SPI SPI Frsky D8/D16SPI FlyskyPNP (without onboard receiver) Spare parts

Specifications

• MotorMode: EX1103 KV11000Configu-ration:9N12PStator Diamter:11mmStator Length:3mmShaft Diameter:Φ1.5mmMotor Dimension(Dia.*Len):Φ13.5mm*15.5mmWeight(g):3.8gNo.of Cells(Lipo):1-2SPropellersWeight:0.88gMaterial: PCPitch:2.3inchProps Dia:52.17mmCenter Thickness:5mmCenter Hole Dia:1.5mmFlight controllerX12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FRX12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FSX12 PNP V1.1 flight controller without onboard receiver Target: CRAZYBEEF4DXMCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: ICM20689 or ICM42688P(SPI connection)Mount hole size: 25.5mm*25.5mmPower supply: 1-2S battery input (DC 2.9V-8.7V)Built-in 12A(each) Blheli_S 4in1 ESCBuilt-in Betaflight OSD(SPI Control)Built-in 5.8G OpenVTX 0mw~400mwBuilt-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2ABuilt-in voltage detectionBuilt-in current sensor Onboard 4in1 ESCPower supply: 1-2S LiPo/LiPo HV Current: 12A continuous peak 15A (3 seconds)Support BLHeliSuite programmableDefault Factory firmware: Z_H_30_REV16_7.HEXDefault protocol: DSHOT300Support Bluejay firmwareOnboard SPI ExpressLRS 2.4GHz ReceiverPacket Rate option: 50Hz/150Hz/250Hz/500HzExpressLRS Firmware version: V2.0RF Frequency: 2.4GHzAntenna : SMD antennaTelemetry output Power: <12dBmReceiver protocol: SPI ExpressLRSCompatible with ExpressLRS V2.0 TX ModuleCouldn’t flash separately ExpressLRS firmware Could flash FC firmware to support ExpressLRS v3.0 TX moduleOnboard SPI Frsky D8/D16 receiver VersioSPI BUS receiver Frsky D8/D16 compatibleCompatible Non EU transmitter D8/D16 modelChannels: 8ch/16chNo ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support Onboard SPI Flysky receiver VersionSPI BUS receiverProtocol: AFHDS-2A Channels: 14ch(AFHDS-2A)No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe supportPNP Version(without onboard receiver)Full UART1 for external ReceiverSupport CRSF/GHOST/SBUS/IBUS/DSMX protocolIR1 pad(invert RX1) used for SBUS inputOnboard 5.8g OPENVTXFirmware version: OPENVTXSmartaudio v2.1PIT Mode supportRCE Mode supportChannels:48chTransmitting Power: 0/RCE/25mw/100mw/400mwPower supply: DC 5V Current (5v): <650ma (400mw)Caddx ANT 1200tvl cameraImage Sensor: 1/3" CMOS SensorHorizontal Resolution: 1200 TVLTV System: NTSC or PAL IMAGE: 16:9 or 4:3Synchronization: InternalElectronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000S/N Ratio : >52dB (AGC OFF)Video Output: CVBSLens: 1.8mmMin. Illumination: [email protected] Gain Control: YESWDR: Global WDRDNR: 3D DNRDimensions: 14*14mm(with bracket to 19*19mm)Wide Power Input: DC 3.7-18VWeight: 2g (N.W.)

What's in the Box